Automatic Mode

You can operate the Model 850PS in either automatic or manual mode.

To enter into automatic mode, press the Aut/Man button.

This allows the machine to automatically perform a wrap cycle with little effort on the operator’s part. When in automatic mode, press the button again to enter into manual mode.

Creating a Cycle

There are nine total customizable wrap cycles that you can create and save for future use.

To create or change parameters for each individual cycle, first press the Save button.

Press the plus (+) or minus (-) button to select the desired slot (1-6) to save it to, and then press the “Aut/Man” button to confirm.

When you want to load a cycle, press the “Load” button.

Then select the desired slot (1-6) and press the “Aut/Man” button to confirm.

Toggling Between Wrap Cycles

The 850PS allows you to toggle between three different types of wrap cycles.

To toggle, first press the “PRG” button.

Then select from one of the three wrap cycles:

To optimize each wrapping cycle, choose from one of the following parameters:

Playback Cycle

The playback cycle allows the operator to manually record a wrap cycle to be used in the future. The operator can control the carriage height, travel, and rotation of the turntable. A single cycle can record up to 99 steps, making it highly flexible for any wrapping application.

Recording a Cycle

To begin recording a cycle, first push the “Record” button.

Then push the right arrow button.

These buttons will allow the operator to control the wrap cycle.

When the wrap cycle has completed, press the stop button.

Then press the “Save” button to save it into the desired recorded program slot. The operator can then access this saved cycle at any point in the future.

Manual Mode

Manual mode allows the operator to control the machine manually.

To enter into manual mode, press the Aut/Man button.

This will allow the operator to raise and lower the carriage by pressing either of these two buttons.

If required, the operator can also operate the turntable by pressing the turntable button.

To keep the turntable turning on its own accord, hold the turntable button down for three seconds.

Optional Accessories

Handle-It offers several other accessories to help further refine and improve your packaging operations:

• Integrated Scale to weigh pallet loads and cut down on freight overage charges (SWS-0850-ASM)
• A loading ramp for hand pallet jacks (SWM-SA-STDRMP) **add the deck extension if using electric walk-behinds (SWM-EXD)
• An extended Max Wrapping Height 98″ (XHT)

To learn more about these additional accessories, contact your local Handle-It distributor for pricing and availability.